CS140 T
CS140 T
CS140 T
Description:
CS140 T combines the performance of two machines in one single 3.5 cu.m. machine, thus providing two actions in one solution and ensuring maximum quality results.
Comac has designed a unique system which combines the strength of mechanical action to collect larger waste and the efficiency of the suction action for dust, to provide excellent results, with one machine, in a single pass.
The powerful Twin Action System vacuums also the fine dust PM10 and reduces water consumption, facilitating use even in the most difficult conditions. It can save up to 100.000 liters of water per year.
With a working width of 1400 mm, CS140 T is suitable to clean urban areas, such as roads or parking spaces and industrial areas, such as metallurgy plants and cement factories; the Twin Action system allows operation even on bumpy road surfaces, since no rigid element is in contact with the ground. As a consequence tree roots or protruding manholes are not a problem. Moreover the hydraulic support and the presence of the flaps, ensure a constant pressure on the ground for the brush independently of wear or the terrain, for maximum cleaning results.
CS140 T uses the central brush continuously, thereby ensuring higher quality cleaning because it is uniform for the entire width of the brush. The side brushes are used only to convey the dirt from the edges to the operating area of the central brush, which collects both debris and dust thanks to the highly efficient suction action. The third brush (optional) allows to reach areas far from the machine, like on sidewalks.
CS140 T is equipped with a VM R754, which is specifically sized for continuous applications at constant speed with reduced consumption. It can work even for more consecutive shifts.
The large filtering surface and the efficiency of the dusty air intake distribution system over the entire surface, ensure continuity of performance over time: these characteristic together with the materials chosen (polyester) and the action of the two filter shaking, ensure the return of perfectly clean air into the environment.
CS140 T combines the performance of two machines in one single 3.5 cu.m. machine, thus providing two actions in one solution and ensuring maximum quality results.
Comac has designed a unique system which combines the strength of mechanical action to collect larger waste and the efficiency of the suction action for dust, to provide excellent results, with one machine, in a single pass.
The powerful Twin Action System vacuums also the fine dust PM10 and reduces water consumption, facilitating use even in the most difficult conditions. It can save up to 100.000 liters of water per year.
With a working width of 1400 mm, CS140 T is suitable to clean urban areas, such as roads or parking spaces and industrial areas, such as metallurgy plants and cement factories; the Twin Action system allows operation even on bumpy road surfaces, since no rigid element is in contact with the ground. As a consequence tree roots or protruding manholes are not a problem. Moreover the hydraulic support and the presence of the flaps, ensure a constant pressure on the ground for the brush independently of wear or the terrain, for maximum cleaning results.
CS140 T uses the central brush continuously, thereby ensuring higher quality cleaning because it is uniform for the entire width of the brush. The side brushes are used only to convey the dirt from the edges to the operating area of the central brush, which collects both debris and dust thanks to the highly efficient suction action. The third brush (optional) allows to reach areas far from the machine, like on sidewalks.
CS140 T is equipped with a VM R754, which is specifically sized for continuous applications at constant speed with reduced consumption. It can work even for more consecutive shifts.
The large filtering surface and the efficiency of the dusty air intake distribution system over the entire surface, ensure continuity of performance over time: these characteristic together with the materials chosen (polyester) and the action of the two filter shaking, ensure the return of perfectly clean air into the environment.
Advantages:
Vehicle height control
Comac has produced a special device which, acting separately on the four wheels, maintains constant the height from the ground, optimizing work and stability, even when the load varies. The operator can position the machine on three different pre-established levels in order to meet various needs: working position, moving position, maintenance position.
Twin Action System
The mechanical action consists in the movement of the central brush (1) which collects the material from the ground and conveys it to a hopper where is shredded by the hammers of a rotating shaft (2). At this point, by means of the suction action (3), the material is raised to the collection hopper (4), while the sucked air is filtered (5) and returned to the environment perfectly clean (6).
It makes you save up to 100.000 liters of water per year
Unlike traditional sweeping machines, with CS140 T the side brushes have an auxiliary function (only used along edges and pavements) consequently reducing the use of water which is employed only in a nebulized state and only to control dust, without wetting the ground.
Four-wheel steering system
The four-wheel steering system provides great manoeuvrability to operate in places where space is limited such as near walls or fences, in historical town centers or cluttered areas, at the same time guaranteeing maximum vehicle stability during transfer even at the highest speed.
Suction hose (optional)
The operator can use the suction hose to collect material accumulated in areas difficult to be reached like benches, grassy areas and other covered corners. Thanks to the large diameter of the hose, it can suck up waste of various dimensions such as paper, leaves, bottles and cans.
High pressure washer wand (optional)
The high pressure washer wand cleans hard-to-reach areas, removes dirt from vertical surfaces, from walls and can be used to clean the machine itself.
|
CS140 T
|
|
|
Working width with central brush (cm/inch)
|
140/55,3
|
|
Working width with side brush (cm/inch)
|
222/87,6
|
|
Working width third brush (cm/inch)
|
315
|
|
Diesel motor (HP)
|
100
|
|
Type of drainage
|
hydraulic
|
|
Debris hopper capacity (l/gal)
|
3500/923,5
|
|
Filtering surface (sq.m/ft²)
|
50/538,2
|
